Features
AutoTune
AutoTune gives optimal engine performance throughout automatic engine setting.
No time spent on carburetor adjustments. It compensates for
different fuels, altitude, humidity, temperature and clogged air filter.
X-Torq®
Delivers lower fuel consumption and reduced exhaust emission levels in accordance with the world´s most stringent environmental regulations.
Air Injection®
Centrifugal air cleaning system removes larger dust and debris particles before reaching the air filter. This results in reduced air filter cleanings and improved engine life.
RevBoost™
Rapid acceleration and higher chain speed for best limbing performance.
Flip-up tank cap
The flip-up tank cap is easy to open and close when refueling.
Heated handles
Efficient heating coils in the front and rear handles make the saw more comfortable to use in cold and damp conditions.
Fast acceleration
Low weight on all moving engine parts means fast acceleration.
Heated Carburettor
The electrical carburettor heating ensures reliable starting and operation in cold conditions.
LowVib®
System designed to reduce vibration levels to the operator, which lessens fatigue.
Adjustable oil pump
Allows you to control oil flow depending on application and weather conditions.
Quick-release air filter
Facilitates cleaning and replacement of the air filter.
Magnesium crankcase
Sturdily built crankcase withstands high rpms and tough professional use, ensuring a long service life.
Combined choke/stop control
Allows for easier starting and reduces the risk of engine flooding.
Quick release air filter cover
Quick release cover saves time when cleaning or changing spark plug or filter.
Snap-lock cylinder cover
Saves time when changing spark plugs and cleaning.
Three-piece crankshaft
Forged three-piece crankshaft for maximum durability for the toughest applications.
Side-mounted chain tensioner
Easier access to chain tensioning device.
Slimmed-down design
Low, slender saw body makes the chainsaw easy and convenient to handle in any situation.
Felling marks
Distinct, colored marks used for aiming the direction of timber fall.
Visible fuel level
Transparent fuel indicator makes it easy to check fuel level.
Smart Start®
The engine and starter have been designed so the machine starts quickly with minimum effort.
Inertia activated chain brake
Reduces the likelihood of injury due to kickback.
Air Purge
Removes air from carburetor and fuel system for easy starting.
Retained bar nuts
The retaining function prevents loosing the bar nuts.
Specifications
| Engine | 562 XP® G Art no: 970 50 22‑02 |
562 XP® G Art no: 970 50 22‑04 |
| Power output | 4.7 hp | 4.7 hp |
| Cylinder displacement | 3.65 cu.inch | 3.65 cu.inch |
| Maximum power speed | 9,600 rpm | 9,600 rpm |
| Idling speed | 2,800 rpm | 2,800 rpm |
| Torque, max. | 3.65 Nm | 3.65 Nm |
| Torque, max. at rpm | 8,100 rpm | 8,100 rpm |
| Clutch engagement speed (±120) | 4,300 rpm | 4,300 rpm |
| Fuel consumption | 494 g/kWh | 494 g/kWh |
| Fuel consumption | 3.84 lbs/h | 3.84 lbs/h |
| Spark plug | NGK CMR6H | NGK CMR6H |
| Electrode gap | 0.02 in | 0.02 in |
| Ignition module air gap | 0.01 in | 0.01 in |
| Emission | ||
| Exhaust emissions (CO2 EU V) | 777 g/kWh | 777 g/kWh |
| Equipment | ||
| Bar length (inch) | 18 in | 20 in |
| Recommended bar length, min | 15 in | 15 in |
| Recommended bar length, max | 28 in | 28 in |
| Chain type | C85 | C85 |
| Gauge | .058" | |
| Pitch | 3/8" | 3/8" |
| Dimensions | ||
| Weight (excl. cutting equipment) | 13.9 lbs | 13.9 lbs |
| Lubricant | ||
| Lubricant type (Engine) | Husqvarna 2 stroke or equiv. at 50:1 | Husqvarna 2 stroke or equiv. at 50:1 |
| Oil tank volume | 0.7 US pint | 0.7 US pint |
| Oil tank volume | 0.33 l | 0.33 l |
| Sound and Noise | ||
| Sound power level, guaranteed (LWA) | 118 dB(A) | 118 dB(A) |
| Sound power level, measured | 116 dB(A) | 116 dB(A) |
| Sound pressure level at operators ear | 106 dB(A) | 106 dB(A) |
| Vibration | ||
| Equivalent vibration level (ahv, eq) front handle | 3.2 m/s² | 3.2 m/s² |
| Equivalent vibration level (ahv, eq) rear handle | 5 m/s² | 5 m/s² |
| Engine | 562 XP® G Art no: 970 50 22‑12 |
562 XP® G Art no: 970 50 22‑54 |
| Power output | 4.7 hp | 4.7 hp |
| Cylinder displacement | 3.65 cu.inch | 3.65 cu.inch |
| Maximum power speed | 9,600 rpm | 9,600 rpm |
| Idling speed | 2,800 rpm | 2,800 rpm |
| Torque, max. | 3.65 Nm | 3.65 Nm |
| Torque, max. at rpm | 8,100 rpm | 8,100 rpm |
| Clutch engagement speed (±120) | 4,300 rpm | 4,300 rpm |
| Fuel consumption | 494 g/kWh | 494 g/kWh |
| Fuel consumption | 3.84 lbs/h | 3.84 lbs/h |
| Spark plug | NGK CMR6H | NGK CMR6H |
| Electrode gap | 0.02 in | 0.02 in |
| Ignition module air gap | 0.01 in | 0.01 in |
| Emission | ||
| Exhaust emissions (CO2 EU V) | 777 g/kWh | 777 g/kWh |
| Equipment | ||
| Bar length (inch) | 20 in | 24 in |
| Recommended bar length, min | 15 in | 15 in |
| Recommended bar length, max | 28 in | 28 in |
| Chain type | C83 | C83 |
| Gauge | ||
| Pitch | 3/8" | 3/8" |
| Dimensions | ||
| Weight (excl. cutting equipment) | 13.9 lbs | 13.9 lbs |
| Lubricant | ||
| Lubricant type (Engine) | Husqvarna 2 stroke or equiv. at 50:1 | Husqvarna 2 stroke or equiv. at 50:1 |
| Oil tank volume | 0.7 US pint | 0.7 US pint |
| Oil tank volume | 0.33 l | 0.33 l |
| Sound and Noise | ||
| Sound power level, guaranteed (LWA) | 118 dB(A) | 118 dB(A) |
| Sound power level, measured | 116 dB(A) | 116 dB(A) |
| Sound pressure level at operators ear | 106 dB(A) | 106 dB(A) |
| Vibration | ||
| Equivalent vibration level (ahv, eq) front handle | 3.2 m/s² | 3.2 m/s² |
| Equivalent vibration level (ahv, eq) rear handle | 5 m/s² | 5 m/s² |
