Features
An efficient job starts with a sharp blade
The hardened steel blades, optimized edge angles and the high knife speed increase productivity when trimming.
Durable gears
The gear components have been developed for long life under tough conditions.
Two-stage air filter
The unloosable two-stage air filter in dual materials provide less cost for service and less engine wear.
Multi position handle
The rear handle can be put in multi positions to facilitate cutting the sides and top of hedges.
Stop switch automatically resets to the ON position for easier starting
Starting a cold engine is easier with the intuitive choke which is easy to reach and set
Effective low noise engine creates less disturbance in the work area
Stays sharper longer and ensures durability.
Specifications
| Capacity | 522HD60S Art no: 967 65 88‑01 |
| Cutting speed | 4,400 cut/min |
| Engine | |
| Cylinder displacement | 1.3 cu.inch |
| Power output | 0.8 hp |
| Maximum power speed | 7,800 rpm |
| Fuel tank volume | 15.2 fl oz |
| Idling speed | 3,000 rpm |
| Spark plug | NGK CMR6A |
| Electrode gap | 0.02 in |
| Equipment | |
| Knife length | 24 in |
| Teeth opening | 1.2 in |
| Sound and Noise | |
| Sound power level, guaranteed (LWA) | 102 dB(A) |
| Sound pressure level at operators ear | 93 dB(A) |
| Transmission | |
| Gear ratio | 4.09 |
