Features
Easy to start
The unique design of the carburettor, cylinder and digital ignition system, together with air purge and decompression valve ensure an easy start.
Anti-vibration system
Our anti-vibration system reduces vibrations in the cutter handles, so they are more comfortable to hold and can be used for longer periods. The distance between the handles is large to enable the user a comfortable operating position and to reduce strain. The handles and the short engine body mean the user always stands close to the machine, for easier handling and control.
Superior power with low emissions
Patented X-torqTM engine that uses air to flush out the cylinder provides exceptional power but keeps fuel consumptions and emissions low.
Magnesium blade guard
Contributes to a light weight which gives an improved power-to-weight ratio. New stepless adjustment makes it easier to change cutting position.
Reduced wear
Reduced wear thanks to the drive belt with fully sealed transmission, which keeps out the cutting dust.
Cuts close to walls or ground
The cutting arm is reversible which lets you cut closer to walls or the ground. The drive belt has a fully sealed transmission. This keeps out cutting dust, reducing wear on the belt.
Maintenance-free air filter
The only time the filter needs to be checked and changed is if you experience lack of power.
Reversible cutting arm
The drive belt with fully sealed transmission keeps out cutting dust for reduced wear and allows close cutting to walls and floor.
Smooth blade stop
Reduces the stop time of the blade when the machine is switched off, which enables you to quickly move on to the next job.
Active Air Filtration™
Our two-step filtration system with centrifugal cleaning and a single paper filter increases product life and extends service intervals.
SmartCarb™
Our built-in automatic filter compensation maintains high power during the air filter life time.
Poly-V belt
Provides better transmission of power, less frequent re-tensioning and extended service intervals.
Wet cutting kit
Less slurry and low water consumption thanks to the progressive water valve, this adjusts the water volume to the exact amount needed.
Specifications
| Engine | K 1270 II Art no: 967 97 87‑01 |
K 1270 II Art no: 967 97 88‑01 |
| Output power | 7.8 hp | 7.8 hp |
| Cylinder displacement | 7.25 cu.inch | 7.25 cu.inch |
| Electrode gap | 0.02 in | 0.02 in |
| Cylinders | 1 | 1 |
| Number of strokes | 2-stroke engine | 2-stroke engine |
| Cutting deck | ||
| Cutting depth, max | 4.6 in | 5.7 in |
| Emission | ||
| Exhaust emissions (CO2 EU V) | 726 g/kWh | 726 g/kWh |
| Cutting System | ||
| Blade diameter, max | 14 in | 16 in |
| Arbor diameter | 0.8/1 in | 0.8/1 in |
| Blade thickness, max | 0.2 in | 0.2 in |
| Peripheral speed, max | 18,000 fpm | 18,000 fpm |
| Dimensions | ||
| Product size length | 28.74 in | 29.25 in |
| Product size width | 9.57 in | 9.49 in |
| Product size height | 17.09 in | 18.52 in |
| Weight | 30 lbs | 31.3 lbs |
| Sound and Noise | ||
| Sound power level, guaranteed (LWA) | 117 dB(A) | 117 dB(A) |
| Sound pressure level at operators ear | 104 dB(A) | 104 dB(A) |
| Vibration | ||
| Vibrations left/front handle | 4.5 m/s² | 3.9 m/s² |
| Vibrations right/rear handle | 3.7 m/s² | 4 m/s² |
