Features
- Adjustable Automatic Oiler
The Adjustable Automatic Oiler allows the user to adjust the lubricant of the guide bar and saw chain for different bar lengths and cutting conditions.
- IntelliCarb™ Compensating Carburetor
The IntelliCarb™ Compensating Carburetor is designed to automatically adjust the air/fuel ratio when the air filter becomes restricted or partially clogged and maintains the engine’s correct RPM. IntelliCarb™ uses air from the clean side of the air filter to control the diaphragm and flow of fuel. As the air filter becomes dirty and less air is available for the carburetor, the IntelliCarb™ system adjusts the fuel flow to compensate for the decrease in air flow. This is in contrast to typical carburetors that utilize this air from the “dirty” side of the air box.
- Side-Access Chain Tensioner
The side-access chain tensioner makes it much more convenient for the user to adjust the saw chain with a bar wrench as opposed to the typical location of the guide bar adjustment screw.>
- Wrap Handle (R)
Saw can be used in multiple positions for felling or limbing with hands in the proper positions.
- Reduced-Emission Engine Technology - Caring for Nature
The STIHL Inc. “Caring for Nature” seal identifies its powered products that are more environmentally conscious, producing zero or low exhaust emissions. STIHL Inc. defines “low exhaust emissions” as being cleaner than EPA and/or CARB exhaust emission standards.
Specifications
POWER SOURCE | Gas |
POWERHEAD WEIGHT | 15.4 lbs. |
GUIDE BAR LENGTH (Recommended) | 20 in. |
OILOMATIC® CHAIN | 3/8" RDR Rescue Chain (RDR) |
CHAIN OIL CAPACITY | 11 oz. |
ENGINE POWER | 6.0 bhp |
FUEL CAPACITY | 27.1 oz. |
DISPLACEMENT | 4.7 cu. in. |
Note: STIHL recommends #3944 (36 RDR 72) OILOMATIC® saw chain and 20" 3003 000 9421 Ematic™ guide bar combination. Compatible guide bar ranges: 16" to 25" Depth Limiter Kit consists of depth limiter and special 20" guide bar (3003 002 9421) which must be used. Maximum depth of cut with depth limiter is 7.8 in. (20 cm). |