Features
- Industry's Largest Nozzle Selection
- Hot Spot Watering
- Adjustment With No Disassembly
- True Part and Full-Circle in One – (40° - 330° part circle)
TruJectory™ Adjustment of the main nozzle—24 positions from 7°-30°
From 7-30 degrees this patented feature in 1 degree increments puts water where you want it for maximum distribution uniformity. Adjust from the top of the sprinkler in seconds, wet or dry. This flexibility lets you tackle every obstacle on the course; wind, trees, bunkers, mounds and more.
The Industries Largest and Most Flexible Nozzle Selection
With the industries largest selection of nozzles Toro sprinklers allow you to put the precise amount of water exactly where you need it.
Indestructible Stainless Steel Valve Seat
Never gets damaged; never requires replacement; lower cost of ownership
Ratcheting Riser
For fine-tuning arc adjustment after installation.
Future-Proof Your Investment
Compartment provides room to grow. Whatever the future holds, this sprinkler will be ready. Getting smarter without digging!
2-wire module
accessible from the top allows for LSM module retrieval, system troubleshooting and system repairs without digging!
Nozzle Base Clutching
Hot spot watering has never been easier, simply turn in either direction, hold and shoot to put down as much water as needed, exactly where you want it. Standard on all part circle models.
Pilot Valve Accessible
Toro’s patented CHECK FLOW™ feature facilitates troubleshooting, pressure adjustments, solenoid and pilot valve servicing without turning the water off or digging!
Wire splices protected and accessible from the top
The protective enclosure isolates wire splices from the soil and potential shorts to ground. Provides access for system troubleshooting and repairs without digging!
Specifications
- Radius
INF35-6: 42' - 92'
INF55-6: 52' - 100' - Flow
INF35-6: 7.1 - 45.3 GPM
INF55-6: 13.9 - 61.1 GPM - Precipitation Rate
INF35-6: Min = .37"/hr; Max = .53"/hr
INF55-6: Min = .43"/hr; Max = .60"/hr - Trajectory
24 position from 7° - 30° in 1° increments - Recommended Operating Pressure
65-100 PSI (4.5 - 6.9 BAR) - Minimum Operating Pressure
40 PSI (2.8 BAR) - Inrush
60 Hz, 0.12 Amps - Holding
60 Hz, 0.10 Amps - Inlet
1" (2.5 cm) and 1 1/2" (3.8 cm) NPT, BSP, Acme - Pop-Up Height
3 1/4" INF55-6; 5.13 lbs - Body Height
INF35-6: 10"
INF55-6: 11 3/8" - Weight
INF35-6: 4.31 lbs
INF55-6; 5.13 lbs - Cap Diameter
SMART ACCESS cover and compartment
INF35-6: 7 5/8
INF55-6: 7 5/8
