Features
Simple Conversion from Greens to Tees
The innovative swing axle design can quickly convert the machine from a Greens to a Tee mower by keeping the bedknife cutting edge in an optimal position for the respective cutting height and the handle location in the correct ergonomic position.
Hi-Lo Clip Rate Knob
Clip frequency can easily be changed in the field to mow the perimeter, collars etc. The quick-change feature also can be locked out for added control.
Reel Engagement Lever
Convenient, easy to reach location to engage reel from the operator position.
Proven Honda® GX 120 Engine
3.5 HP (at 3600 RPM) Honda engine with ample power for cutting and accessorizing.
Durable Gear Drive Transmission
Provides long life and best-in-class transmission durability. Lubricated for life, no grease points.
Telescoping Handle
Engineered to accommodate operators of different heights, for mowing in a natural upright position. Leads to less fatigue and a superior cut. Adjustable to 5 distinct handle positions.
Modular Sub-Assembly Design
Make repairs simple and quick. The engine , transmission, drum or cutting unit sub-assemblies can be easily removed for timely and cost effective replacement or repair.
Handle Isolation Mounts
Two rubber grommets eliminate minor oscillations in Height-of-Cut caused by walking strides. Delivers a consistent cutting height on each and every green for optimal playability.
Onboard Back-Lapping Option
The entire Greensmaster 1000 Series fleet can be back-lapped simultaneously without additional motors or bench tools. (Available on the GR 1021 and 1026 only).
Easy-Reach Adjustable Throttle
All operator controls are within easy reach to perfect the mowing process, improve cut consistency, and enhance control – in normal and tight turn-around situations.
Traction Release Lever
Disengage the traction with a simple lever twist. Getting around the shop has never been easier!
Standard or Interlaced Grooming
Numerous quick-change options and accessories are available to help customize the cut and aftercut appearance.
Detachable DPA Cutting Units
Change cutting units in just a few minutes! Easily choose between an 8, 11 or 14 blade EdgeSeries™ reel cutting unit configuration. Simply unbolt and replace an entire cutting unit for service or a simple exchange - to avoid costly down time.
Dual Function Bail
A single bail combines safety and ease-of-operation. Convenient operation allows the mower to slow down or come to a full stop during turn-arounds without disengaging traction to line up for next mowing pass. Also ideal when using turn-around mats to preserve collar health.
Specifications
| Blade Style/Type | Reel |
| Blade Type (Description) | EdgeSeries™ DPA radial reels. |
| Clip Frequency/Backlapping | Quick-change dual-speed gear drive, combined with positive drive belt - four possible reel speed/clip settings. Backlapping optional. |
| Clutch | Externally-mounted two sided dry disc clutch actuated by dual motion bail. |
| Controls | Engine mounted: recoil starter, choke, fuel shutoff. Handle mounted: on/off switch, throttle lever, dual motion traction / safety bail, reel engage lever, service/park brake lever, hour meter, light switch (optional). |
| Cutting Unit Accessories | 8, 11, 14-Blade DPA Cutting Unit, Roller Options, Groomer Options, Scraper/Brush Options, Bedknife Options, Tools and Maintenance Options. |
| Cutting Unit Suspension | Fixed |
| Cutting Unit Type/Configuration | Single detachable cutting unit allows easy removal for service / maintenance or cutting unit exchange for different uses. |
| Drivetrain | Gas |
| Engine Cooling | Air Cooled |
| Fuel / Power Source | Gasoline |
| Fuel Capacity | 2.1 U.S. qt. (2 L) |
| Ground Speed - Forward | 0 - 5.3 mph (0 - 8.5 km/h) |
| Handle | Loop handle with telescoping adjustment with 5" (12.7 cm) total travel, rubber isolated to minimize operator influence during mowing. |
| Height of Cut Range | For Greens: (Drum Position One) 0.062" - 0.312" (1.5 mm - 8.0 mm) For Tees: (Drum Position Two) 0.25" - 0.625" (6.0 mm - 16.0 mm) High Height of Cut Kit: (Drum Position Two) 1.18" (30 mm) |
| Kickstand | Standard |
| Lighting | Optional |
| Main Frame/Chassis | Fully modular design allows quick disassembly for service / maintenance of all major components. |
| Mowing Speed | 2.0 - 3.5 mph (3.2 - 5.6 km/h) |
| Number of Blades | 11, 14, 8 |
| Optional Accessories | LED Light Kit, Cutting Unit Light Kit Mount, Push Broom Kit, Backlap Access Kit, Backlap Kit, Wireless Hour Meter Kit, High Height of Cut Bracket, Wheel Kit |
| Parking/Service Brakes | Service / parking - band type. |
| Power Train (Engine Description) | Honda® GX120 - 3.5 hp (2.6 kW) @3600 rpm, gasoline with integral lighting coil. |
| Reel Diameter | 5" (12.7cm) |
| Reel/Cylinder Drive | Mechanical/Belt |
| Starting | Recoil |
| Tires - Rear | Optional - Two quick-detachable pneumatic tires (3" x 3.25" - 6") |
| Traction Drive | Full gear drive transmission with integral traction differential and traction drive disconnect to ease movement during service / maintenance operations. Interchangeable drum drive gear cases. |
| Traction Drum | Dual position traction drum with positions for contour following or forward weight bias at higher heights of cut. |
| Weight | 224 lbs. (100 kg) with 11-blade cutting unit, aluminum Wiehle roller. |
| Width of Cut | 21" (53.3 cm) |
