Features
Hi-Lo Clip Rate Knob
Clip frequency can easily be changed in the field to mow the perimeter, collars etc. The quick-change feature also can be locked out for added control.
Reel Engagement Lever
Convenient, easy to reach location to engage reel from the operator position.
Proven Honda® GX 120 Engine
3.5 HP (at 3600 RPM) Honda engine with ample power for cutting and accessorizing.
Durable Gear Drive Transmission
Provides long life and best-in-class transmission durability. Lubricated for life, no grease points.
Telescoping Handle
Engineered to accommodate operators of different heights, for mowing in a natural upright position. Leads to less fatigue and a superior cut. Adjustable to 5 distinct handle positions.
Modular Sub-Assembly Design
Make repairs simple and quick. The engine , transmission, drum or cutting unit sub-assemblies can be easily removed for timely and cost effective replacement or repair.
Handle Isolation Mounts
Two rubber grommets eliminate minor oscillations in Height-of-Cut caused by walking strides. Delivers a consistent cutting height on each and every green for optimal playability.
Onboard Back-Lapping Option
The entire Greensmaster 1000 Series fleet can be back-lapped simultaneously without additional motors or bench tools. (Available on the GR 1021 and 1026 only).
Simple Conversion from Greens to Tees
The innovative swing axle design can quickly convert the machine from a Greens to a Tee mower by keeping the bedknife cutting edge in an optimal position for the respective cutting height and the handle location in the correct ergonomic position.
Easy-Reach Adjustable Throttle
All operator controls are within easy reach to perfect the mowing process, improve cut consistency, and enhance control – in normal and tight turn-around situations.
Traction Release Lever
Disengage the traction with a simple lever twist. Getting around the shop has never been easier!
Standard or Interlaced Grooming
Numerous quick-change options and accessories are available to help customize the cut and aftercut appearance.
Detachable DPA Cutting Units
Change cutting units in just a few minutes! Easily choose between an 8, 11 or 14 blade EdgeSeries™ reel cutting unit configuration. Simply unbolt and replace an entire cutting unit for service or a simple exchange - to avoid costly down time.
Dual Function Bail
A single bail combines safety and ease-of-operation. Convenient operation allows the mower to slow down or come to a full stop during turn-arounds without disengaging traction to line up for next mowing pass. Also ideal when using turn-around mats to preserve collar health.
Specifications
| Blade Style/Type | Reel |
| Blade Type (Description) | EdgeSeries™ DPA radial reels. |
| Clip Frequency/Backlapping | Quick-change dual-speed gear drive, combined with positive drive belt - four possible reel speed/clip settings. Backlapping optional. |
| Clutch | Externally-mounted two sided dry disc clutch actuated by dual motion bail. |
| Controls | Engine mounted: recoil starter, choke, fuel shutoff. Handle mounted: on/off switch, throttle lever, dual motion traction / safety bail, reel engage lever, service/park brake lever, hour meter, light switch (optional). |
| Cutting Unit Accessories | 8, 11-Blade DPA Cutting Unit, Roller Options, Groomer Options, Scraper/Brush Options, Bedknife Options, Tools and Maintenance Options. |
| Cutting Unit Suspension | Fixed |
| Cutting Unit Type/Configuration | Single detachable cutting unit allows easy removal for service / maintenance or cutting unit exchange for different uses. |
| Drivetrain | Gas |
| Fuel / Power Source | Gasoline |
| Fuel Capacity | 2.1 U.S. qt. (2 L) |
| Ground Speed - Forward | 0 - 5.3 mph (0 - 8.5 km/h) |
| Handle | Loop handle with telescoping adjustment with 5" (12.7 cm) total travel, rubber isolated to minimize operator influence during mowing. |
| Height of Cut Range | For Greens: (Drum Position One) 0.062" - 0.312" (1.5 mm - 8.0 mm) For Tees: (Drum Position Two) 0.25" - 0.625" (6.0 mm - 16.0 mm) High Height of Cut Kit: (Drum Position Two) 1.18" (30 mm) |
| Kickstand | Standard |
| Lighting | Optional |
| Main Frame/Chassis | Fully modular design allows quick disassembly for service / maintenance of all major components. |
| Mowing Speed | 2.0 - 3.5 mph (3.2 - 5.6 km/h) |
| Number of Blades | 11, 8 |
| Optional Accessories | LED Light Kit, Cutting Unit Light Kit Mount, Push Broom Kit, Backlap Access Kit, Backlap Kit, Wireless Hour Meter Kit, High Height of Cut Bracket, Wheel Kit |
| Parking/Service Brakes | Service / parking – band type. |
| Power Train (Engine Description) | Honda® GX120 - 3.5 hp (2.6 kW) @3600 rpm, gasoline with integral lighting coil. |
| Reel Diameter | 5” (12.7cm) |
| Reel/Cylinder Drive | Mechanical/Belt |
| Starting | Recoil |
| Tires - Rear | Optional - Two quick-detachable pneumatic tires (3" x 3.25" - 6") |
| Traction Drive | Full gear drive transmission with integral traction differential and traction drive disconnect to ease movement during service / maintenance operations. Interchangeable drum drive gear cases. |
| Traction Drive (System) | Gear |
| Traction Drum | Dual position traction drum with positions for contour following or forward weight bias at higher heights of cut. |
| Weight | 240 lbs (108.8 kg) with 11-blade cutting unit, aluminum Wiehle roller. |
| Width of Cut | 26" (66 cm) |
