Features
Superior Operator Comfort
Adjustable seating, tilt steering, easy access controls provide optimal operator comfort. Standard, mechanical suspension, and air ride seat options available.
CrossTrax®
CrossTrax® powers through challenging terrain by optimizing traction with full-time, bi-directional 4-wheel drive.
7-Gauge Welded Steel Decks
The deck shells are constructed from high-strength 7-gauge welded steel, for greater durability and long life.
Folding Rollover Protection System (ROPS)
A Rollover Protection System (ROPS), complete with seat belt, comes standard for operator protection in the case of accidental rollovers and tipovers. In situations where sufficient vertical clearance is not available, such as loading on an enclosed trailer, the ROPS can be temporarily unlocked and folded down.
Easily Move Between Jobsites
With ground speeds up to 12.5 or 15 mph (20 km/h or 24 km/h) and either 7.8" (19.8 cm) or 8.3" (21.1 cm) of ground clearance, you can easily climb curbs and get to job sites other mowers simply can’t access.
Simple Maintenance
Innovative tilt-up design makes maintenance and cleaning simple. Rotary decks tilt almost 90º while keeping the driveline intact.
Tackle Any Terrain
Bullnose bumper, rugged spindles, and 7-gauge high strength steel decks are built for any conditions.
Powerful Yanmar® Engines
Choice of efficent 24.7hp (18.4 kW) or powerful 37.4hp (27.9 kW) Tier 4/Stage V emission compliant Yanmar diesel engines.
Optional Cab
Move snow or clear debris... all from the comfort of the optional heated cab.
InfoCenter™ Control Panel
Real-time information such as service reminders, alerts, and diagnostic information are delivered to the operator’s fingertips for ultimate control.
Industry's Toughest Spindle Assembly
The cast iron spindle housings feature a massive 9" (22.9 cm) diameter base and eight-bolt mounting pattern that spread impact loads across a broader area of the robust deck shell. The high-efficiency, tapered roller bearings offer greater durability, which means more stability and strength, resulting in longer deck and spindle life.
Steel Blades
The high-strength one-quarter inch (6 mm) thick heat-treated alloy steel blades resist flexing and abrasive wear. The result is a crisp cut time after time.
Specifications
| Air Filter | Remote-mounted Donaldson® air cleaner |
| Armrests | Standard |
| Battery | 12V |
| Blade Style/Type | Rotary |
| Cab Unit | Yes |
| Cab Unit Description | Factory installed, ROPS certified cab with AC and heat. Tempered curved windshield, tinted side and rear glass (50% tint); front wiper/washer; interior mirror and exterior side mirrors; SMV sign; road light kit and work light kit sold separately. |
| Controls | Foot-operated pedal for forward and reverse. Manually adjustable forward speed limiter. Control arm includes hand-operated throttle, PTO switch, deck/implement lift lower switch, ignition switch. |
| Cooling System Description | Rear-mount, cross flow radiator with 8.5 fins per 1" (25 mm), 8 quart (7.6 liter) capacity |
| Cup Holder | Standard |
| Cutting Unit Type/Configuration | 72" (183 cm) Rear Discharge Deck |
| Drivetrain | Diesel |
| Electrical System | 12-volt maintenance-free battery with 540 cold cranking amps at 0 degrees F (-18 degrees C). 80 minute reserve capacity at 80 degrees F (27 degrees C). 55 amp alternator. Easy access to fuse panel. |
| Engine Cooling | Liquid Cooled |
| Fuel / Power Source | Diesel |
| Fuel Capacity | 12 U.S. gal. (45.4 L) |
| Fuel Filter | Fuel filter/water separator. |
| Gauges/Instrumentation | InfoCenter™: LCD display shows gauges, alerts/faults, service reminders, electrical system diagnostics. Indicates coolant temps, oil pressure, alternator voltage, engine hours, engine RPM. |
| Ground Clearance | 8.3" (21 cm) |
| Ground Speed - Forward | 0 - 15 mph (0 - 24 km/h) |
| Ground Speed - Reverse | 0 - 6 mph (0 - 9.7 km/h) |
| Height | 89" (226 cm) |
| Hydraulic Cylinders | Twin 2.5" (6.4 cm) bore, 1.25" (3.2 cm) rod hydraulic cylinders operate lift arms. Hydraulic counterbalance for optimum traction and stability. |
| IntelliDash™ Capable | No |
| Interlocks | Seat, PTO, lift/lower, traction and parking brake interlock switches |
| Lighting | Optional |
| Main Frame/Chassis | All welded tubular and formed steel |
| Max Slope Angle | Refer to operator's manual |
| Mowing Rate (Productivity) | Up to 7.3 acres/hr (2.9 hectacres/hr) with 60" deck Up to 8.7 acres/hr (3.5 hectacres/hr) with 72" deck |
| Oil Capacity | 5.5 US qt (5.2 L) |
| Operator Area | Operator step, beverage holder, controls on right armrest |
| Optional Accessories | LED work light kit, LED road light kit, LED beacon kit, recycler kits, slope sensor kit, heat only cab, accessory control kit, storage box kit, USB charging kit, auxiliary hydraulic kit, hydraulic hose kit, SMV kit, storage bag kit, power harness kit |
| Overall Width | 53.1" (134.8 cm) |
| Power Steering | Yes |
| Power Train (Engine Description) | Yanmar® 3-cylinder, liquid-cooled diesel. Power: 36.8 hp (27.5kW) @ 3000 rpm, Torque peak: 80.7 ft-lbs. (109.4 Nm) @ 1950 rpm. Displacement 1642cc. EPA Tier IV Final / Stage V compliant. |
| Product Length | 107" (271.7 cm) |
| PTO Clutch | Engine mounted 350 ft. lb. (475 Nm) rated electro-magnetic PTO clutch drives 2" (5 cm) telescoping shaft. Rotary deck connection allows for tip-up service position without disconnection of PTO. |
| Seat | Adjustable air-ride suspension seat with retractable seat belt |
| Starting | Key Start |
| Steering System Description | Hydraulic power steering. Tilt steering wheel released and locked by a foot-actuated lever. |
| Tires - Front | 24" x 12" - 12", 4-ply |
| Tires - Rear | 18” x 9.5” - 8”, Turf Tire |
| Tool Box | Optional |
| Traction Drive | CrossTrax® AWD. Series/Parallel hydraulic traction system w/ full time, bi-directional 4-wheel drive. Parallel Series hydraulic flow between front and rear wheels. |
| Traction Drive (System) | 4WD |
| Weight | 2,486 lbs. (1128 kg) |
| Wheelbase | 51.5" (130.8 cm) |
| Width of Cut | 72" (183 cm) |
